8
I
Nomenclature
The figures on p.8 & 9 show a SMZ1000 zooming body, with P-BT
binocular eyepiece tube, C-W 10X eyepieces, Plan Apo 1X objective,
C-FMC focusing mount, and C-PS160 plain stand.
Eyepieces
10X, 15X, 20X and
30X eyepieces are
available.
Diopter ring
Refer to “Adjust the
diopter” on p.16.
Eyepiece tube
clamp screw
Zooming body
Outside diameter of the
part to be mounted the
focusing mount: ø76
Groove for mounting
accessories
Holds the Fluorescent
ring illuminator, Fiber
optic ring illuminator
and the like. Outside
diameter: ø60
Plan 1X, Achro 0.5X,
Plan 1X ERGO, Plan
Apo 0.5X, Plan Apo 1X,
ED Plan 1.5X and ED
Plan 2X objectives are
available. HR Plan Apo
series objectives for
SMZ1500 can be used
also, but the magnifi-
cation in this case
becomes 1.25 times the
magnification indicated
on the objective itself.
Refer to Table 1 on p.36.
Stage plate clamp
screw
Fixes the stage plate
to the stand base.
Zooming body
clamp screw
Fixes the zooming body
to the focusing mount.
Objective
Zooming knob
Changes the
magnification of the
sample image. Refer
to “Zoom” on p.17.
P-BT Binocular
eyepiece tube
Eyepiece sleeve
P-BTL low eye-level
eyepiece tube and P-
BERG tilted eyepiece
tube are also
available.
Coarse focus knob
Fine focus knob
C-PS160 Stand base
Various stands are
available.
Refer to “Focusing”
on p.16.
Refer to “Focusing”
on p.16.
Stage plate
The black or the
white side can be
chosen according to
the sample.
Screw for mounting
accessories
Holds the 1/4 lambda
plate and the like.
The screw on the
inside diameter:
M55 × 0.75
Stand
To Next Page
Loading...
