9
I
Screw hole for mounting
an Epi-arm for halogen
illuminator
Located on both sides
of the focusing mount.
Holds the G-EIA
flexible arm or Epi-arm.
Located on both sides
of the stand base. M5
C-FMC Focusing mount
Screw hole for
mounting accessories
Clamp tool
Used for the stage plate clamp
screw, eyepiece tube clamp
screw, etc. Same size as the
small hexagonal wrench
supplied with the zooming body.
Stored in the top of the pillar.
Zooming knob clicks ON/OFF
screw (inside)
Refer to “ON/OFF of the Zooming
Knob Clicks” on p.17.
Torque adjustment ring
(Innermost ring)
Pillar
Adjusts the torque of the
focus knob. (Refer to
“Adjust the focus knob
torque” on p.15.)
Pillar clamp screw
(Inside)
Focusing mount
clamp screw
Fixes the focusing mount
to the pillar.
To Next Page
Loading...
