10
Eyepiece
10X, 15X, 20X and
30X eyepieces are
available.
Diopter ring
Refer to “Adjust the
diopter” on p.16.
Eyepiece tube
clamp screw
Zooming body
Outside diameter of the
part to be mounted on
the arm: ø76
Groove for mounting
accessories
Holds the Fluorescent
ring illuminator, Fiber
optic ring illuminator and
the like.
Outside diameter: ø60
Screw for mounting
accessories
Holds the 1/4 lambda
plate and the like.
The screw on the inside
diameter: M55
×
0.75
Zooming body
clamp screw
Fixes the zooming
body to the arm.
Objective
Plan 1X, Achro 0.5X, Plan
1X ERGO, Plan Apo 0.5X,
Plan Apo 1X, ED Plan
1.5X and ED Plan 2X
objectives are available.
HR Plan Apo series
objectives for SMZ1500
can be used also, but the
magnification in this case
becomes 1.25 times the
magnification indicated on
the objective itself. Refer
to Table 1 on p.36.
Zooming knob
Changes the
magnification of the
sample image.
Refer to “Zoom” on
p.17.
P-BT Binocular
eyepiece tube
Eyepiece sleeve
P-BTL low eye-level
eyepiece tube and P-
BERG tilted
eyepiece tube are
also available.
Focus knob
Refer to “Focusing”
on p.16.
Arm fixing screw
Holds the arm. The
position of the arm
can be chosen from
either high or low.
Hole for clip
Holds the clip for
retaining the sample.
C-PS Focusing
stand
Various stands
available.
Stage plate
The black or the
white side can be
chosen according to
the sample.
Vertical slider
Arm
The illustrations on p.10 & 11 show a SMZ800 zooming body, with P-BT
binocular eyepiece tube, C-W 10X eyepieces, Plan 1X objective, and
C-PS plain focusing stand.
To Next Page
Loading...
