Nikon SMZ1000 - Nomenclature; Microscope Body Components; Stand and Mounting Hardware

6
Contents
Warning/Caution Symbols Used in This Manual ...........................1
Be sure to always follow these guidelines. ....................................2
WARNING ..........................................................................................2
CAUTION ...........................................................................................3
I Nomenclature ...................................................................................8
II Assembly .........................................................................................12
III Usage................................................................................................ 15
1 Preparations For Observation ......................................................15
1. Adjust the torque of the focus knob.......................................15
2. Adjust the interpupillary distance. .........................................15
3. Adjust the diopter. ................................................................. 16
2 Focusing ......................................................................................16
1. Check the working distance...................................................16
2. Focus on the sample. .............................................................16
3 Zoom ........................................................................................... 17
1. Change the zooming magnification. ...................................... 17
4 If You Cannot Focus On The Sample Though The Zooming
Body Is At The Highest Position. ................................................ 18
IV Using Accessories ........................................................................19
1 Reticles ........................................................................................19
2 Eyepiece Tube ............................................................................. 19
1. P-BTL low eye-level eyepiece tube ....................................... 19
2. P-BERG tilted eyepiece tube ................................................. 20
3 P-IER Eyelevel Riser ..................................................................20
4 Plan 1X ERGO Objective ...........................................................21
5 SM-S4L 4 X 4 Stage L ................................................................ 22
V Illuminator .......................................................................................23
1 Halogen Illuminators ................................................................... 23
1. Lamp ...................................................................................... 24
2. Attaching G-LS to the stand [C-PS & C-PSC] ...................... 25
3. Arm for halogen illuminators ................................................25
4. Power supplies ....................................................................... 27