28
Power Supply XN A (only for regions with 100/120 V power)
Input rating Power supply for 100V regions only:
100 V AC, 50/60 Hz, 30 W
Power supply for 120V regions only:
120 V AC, 50/60 Hz, 30 W
Output rating 3-6 V AC, 3.3 A
Fuse rating 250 V, 1 A
Power Supply TN-PSE30W A (only for regions with 230 V power)
Input rating 230V AC, 50/60Hz, 0.3A
Voltage fluctuation ±10%
Output rating AC 6V 5A
Internal fuse Fast acting type, F1A/250V, 5.2 × 20 mm
Operating Altitude: 2000 m max.
environment Temperature: 0° - 40°C
(indoor use only)
Relative humidity: 85% max.
(no condensation)
Pollution level: Degree 2
Installation: Category 2
Storage Temperature: -20° - 60°C
environment Relative humidity: 90% max.
(no condensation)
Protection class Class 1
Power cord Use only the following power supply cord.
Using the wrong power cord could result in
danger or fire. The protection Class 1 equipment
should be connected to PE (protective earth)
terminal.
• For 220-240V AC area
Approved according to EU/EN standards, 3
conductor grounding Type H05VV-F, 3 m
long maximum, rated at 250V AC minimum.
To Next Page
Loading...
