En_01
66 Bluetooth and Wi-Fi (Wireless LAN)
Compliance with RSS‑247 Issue 2 §6.4
Data transmission is always initiated by software, which is the passed
down through the MAC, through the digital and analog baseband, and
finally to the RF chip. Several special packets are initiated by the MAC.
These are the only ways the digital baseband portion will turn on the RF
transmitter, which it then turns off at the end of the packet. Therefore,
the transmitter will be on only while one of the aforementioned
packets is being transmitted. In other words, this device automatically
discontinue transmission in case of either absence of information to
transmit or operational failure.
•
Notice for Customers in Canada
For indoor use only (5150–5350 MHz).
To Next Page
Loading...
