12
Set the shutter-speed dial for any speed except ÒRÓ. Fold out
the rewind crank and pull up the rewind knob as far as it will go.
Continue to pull up on the rewind crank while turning it back
and forth until the rewind knob locks in place and cannot be
pushed down. This meshes the rewind knob with its shank.
Now turn the rewind crank gently in the direction of the arrow
until you feel a slight tension which indicates that there is no
slack in the film cartridge. Be careful not to exert too
much pressure on the crank.
LOADING THE CAMERA