13
Loading exposes a portion of film. To dispose of this exposed
portion, take two blank exposures. Squeeze the filmadvance
lever slightly so that it springs forward then push down the
safety lock and squeeze the film advance lever twice (see also
p.14) to dispose of the exposed portion of the film. While
advancing the film check to see that the rewind crank turns in
the direction opposite the arrow. This will indicate that the film
has been loaded correctly and is being advanced.
Turn the rewind knob in the direction opposite the arrow and it
will drop back to its recessed position. When not in use, the
rewind crank should be folded flat with its end pointing towards
the front of the camera.
Note: If the film-advance lever is squeezed while the safety lock is off, the
shutter will be released and the frame counter wiH advance one frame. The
frame counter will not rest at 1 when the first exposure is made.
To Next Page
Loading...