Nilan reserves the right to alter these instructions without prior notice Page 8 af 26
Starting and set up of the CTS 602 control
Before starting the Comfort please check all functions as by-pass/cooling, heating and heating sur-
face if installed.
In this passage we will go through the service menu of the CTS 602 control. For daily use of the
CTS 602 control please see the CTS 602 directions. (delivered together with the Comfort).
Use of the CTS600 panel:
- press ESC to go one step back in the menu
- press qpto move up or down in a menu or to adjust an
activated menu
- press ENTER to activate a menu
- press ENTER to confirm a menu
- press OFF to turn off the unit
- press ON to turn the unit on
Figure 5: CTS 602 control
To Next Page
Loading...
Need help?
General
