nilan VPL 15 Top User Manual

Version: 6.00, 12-03-2012
Software-version: 1.38
VPL 15
VPL 15 Top
VPL 25
Installation instruction
CTS 600 by Nilan

nilan VPL 15 Top Specifications

General

Brand	nilan
Model	VPL 15 Top
Category	Control Panel
Language	English

Summary

Power Supply

Assembly of VPL 15/15T/25

Mounting Clearance and Stability

Specifies minimum clearance in front/behind, level installation, and vibration absorber placement for stability.

Condensation Drain and Water Seal

Water Heating Surface Installation

Component Identification and Connection

Water Heating Surface Electrical Connections

Danfoss Actuator Installation and Calibration

Provides detailed steps for re-installing the Danfoss actuator and its automatic calibration process.

Electrical Box and Sensor Wiring

Outlines installation of the electrical box, power supply, and temperature sensors T7/T9 for the heating surface.

Electrical Heating Surface Retrofitting

Starting and CTS 600 Control Setup

Heating Surface Menu Configuration

Selecting Heating Surface Control Type

Details menu options for water heating, electrical binary, and electrical 0-10V control, including required PCB and potential alarms.

Temperature Control Settings

Sensor Selection and Unit Stop Temperature

Allows selection of the controlling sensor (panel or external) and setting a room temperature for unit stoppage to prevent overcooling.

Room Control Configuration

Heat Demand and Neutral Zone Settings

Configures the desired room temperature and the neutral zone for evaporator start/stop to manage heat demand.