Need help?Do you have a question about the Niles SI-2125 and is the answer not in the manual?
General| Amplifier Type | Stereo Power Amplifier |
|---|---|
| Number of Channels | 2 |
| Signal-to-Noise Ratio | > 100 dB |
| Input Sensitivity | 1.0 V |
| Input Impedance | 20 kOhms |
| Gain | 32 dB |
| Trigger Input | 12V DC |
| Weight | 25 lbs |
| Power Output (8 Ohms) | 125 Watts |
| Power Output (4 Ohms) | 200 Watts per channel |
| Frequency Response | 20 Hz - 20 kHz |
| Protection Circuits | Thermal, Short Circuit |
Essential safety warnings regarding electrical shock and equipment exposure to elements.
Details on the amplifier's power output at different impedances.
Guidance on positioning the amplifier for proper ventilation and stability.
Instructions for configuring the amplifier in bridged mono mode for higher output.
Description of front panel LEDs (Power, Active, Protect) and switches.
Details on rear panel inputs, outputs, and control jacks.
Detailed instructions for connecting speakers using bare wire or banana plugs.
Guidance on connecting audio sources to the amplifier's inputs.
Common causes and steps to resolve issues with one audio channel.
Steps to diagnose and fix problems with no sound on either channel.
Troubleshooting steps for when the amplifier fails to power on.
To Next Page
