To Next PageTo Next Page
Need help?Do you have a question about the Niles VCS100 and is the answer not in the manual?
Audio Power Handling| RMS power per channel | 100 W |
|---|---|
| Peak music power per channel | 200 W |
Mounting| Mounting type | In-wall |
|---|---|
| Junction box compatibility | 18-cubic-inch single-gang |
| Minimum junction box depth | 2-3/4" |
Wiring Requirements| Wire gauge | 14-16 gauge |
|---|---|
| Speaker wire runs | Two individual runs of two-conductor or one run of four-conductor |
Dimensions| Unit width | 1-5/8" |
|---|---|
| Unit height | 2-5/8" |
| Faceplate width | 2-3/4" |
| Faceplate height | 4-1/2" |
| Depth behind faceplate | 2-9/16" |
Guide to selecting correct switch settings for speaker numbers and types.
Explains power reduction at 8x setting and dB loss.
Lists necessary tools for installation, including screwdrivers and wire stripper.
Advice on compatibility with speaker selectors and defeatable protection circuits.
Details on required junction box size and depth for installation.
Recommendations for speaker wire gauge, type, and usage guidelines.
Suggests optimal and cautions against problematic mounting locations.
Instructions for replacing Decora-style inserts and knobs for color customization.
Guidance on checking for wall obstructions and running wiring.
Illustrates proper connection of amplifier, volume control, and speakers.
Instruction to set the IM switch based on calculated charts.
Steps for plugging connectors into the volume control unit.
Details on mounting the volume control to the junction box with screws.
Instructions for attaching the Decora faceplate using plate screws.
