To Next PageTo Next PageWhy is there no solution flow in my Nilfisk-Advance Scrubber?
There could be several reasons for inadequate or no solution flow in your Nilfisk-Advance Scrubber. First, ensure the solution tank is filled. Second, check that the solution tank filter ball valve is in the 'on' position. Lastly, inspect the solution filter, valves, and hoses for clogs; clean or replace any clogged components.
What to do if my Nilfisk-Advance 56315036(28D) has inadequate solution flow?
If your Nilfisk-Advance Scrubber has inadequate solution flow, start by checking if the solution tank is empty and fill it if necessary. Then, verify that the solution tank filter ball valve is in the on position. Finally, inspect and clean or replace any clogged solution filters, valves, or hoses.
How to fix inadequate solution flow in Nilfisk-Advance 56315036(28D) Scrubber?
To fix inadequate solution flow in your Nilfisk-Advance Scrubber, begin by ensuring the solution tank is full. Next, check that the solution tank filter ball valve is in the 'on' position. After that, examine the solution filter, valves, and hoses for any clogs. Clean or replace any parts that are clogged.
General| Brand | Nilfisk-Advance |
|---|---|
| Model | 56315036(28D) |
| Category | Scrubber |
| Language | English |
General safety instructions and warnings for operating the machine safely and preventing damage.
Instructions for applying oil and grease to machine components for lubrication.
Explanation of the switches and controls on the machine's operator panel for functionality.
Explanation of the various indicator lights and their meaning on the control panel.
Details the electrical circuit for the solution solenoid valve in auto mode.
Details the electrical circuit for the solution pump in auto mode for AXP/ECO+Solution models.
Details the electrical circuit for the solution solenoid valve on standard models.
Guide to identify and resolve common problems with the solution system.
Electrical troubleshooting steps for solution system issues.
Step-by-step instructions for removing the solenoid valve on AXP/ECO+Solution models.
Overview of the vacuum and recovery system, including dirt/water collection.
Overview of the drive motor, speed controller, and throttles.
Troubleshooting guide for common wheel drive system problems.
Information on battery types, installation, and maintenance for the machine.
Methods for diagnosing problems using the machine's control display or programmer.
Using a programmer for direct diagnostics and troubleshooting.
List of error codes displayed by the main control board and their troubleshooting.
Explanation of control panel switches and the functions they control.
Diagram showing the physical location of electrical system components.
Schematic showing the electrical connections and wiring of the machine.
