Nilfisk-Advance CS7000 - Page 2

Page: 2
CS7000 How To
Store the Machine
1
Rinse the squeegee
and inspect and rotate
or replace if it’s ripped
or torn.
2
Clean and inspect side
skirts.
3
Use the handle near
the center to adjust so
squeegee tips contact
the floor equally.
4
Raise the side skirts,
engage the deck pivot
to release and remove
brushes. Replace as
needed or clean and
set out to let dry.
5
Raise the hopper and
engage the safety arm
and inspect the side
and main brooms for
debris and clean as
needed.
6
If main broom requires
cleaning, remove it by
opening right-side
broom door. Clean and
replace.
7
Wipe down the exterior
of the machine as
necessary.