Nilfisk-Advance CS7000 - Page 3

Page: 3
CS7000 How To
Weekly Maintenance
1
Purge onboard
detergent system (if
equipped).
2
Remove and inspect
the hopper dust control
filter. Clean or replace
as appropriate.
3
Close solution shut-off
valve and Inspect and
clean the solution filter
found at the right-rear
of machine.
4
Inspect and clean the
DustGuard water filter
(if equipped) located
underneath the hopper
on left side of machine.
5
Inspect and clean the
high-pressure water
filter (if equipped)
located near the hose
connection coupler.