Need help?Do you have a question about the Nilfisk-Advance E140.3 X-TRA and is the answer not in the manual?
General| Max Pressure | 140 bar |
|---|---|
| Flow Rate | 500 l/h |
| Hose Length | 9 m |
| Voltage | 230 V |
| Max. Inlet Temperature | 40°C |
| Frequency | 50 Hz |
| Inlet Connection | 3/4 inch |
Instructions for removing and installing the front cabinet of the pressure washer.
Steps for taking apart and reassembling the pump cover, including foam placement.
Guide to removing and refitting the start/stop system and valve.
Steps for removing and reattaching the switchbox cover, noting wire placement.
Procedures for disassembling and assembling the main motor and pump unit.
Steps for removing and reinstalling the main power switch, noting orientation.
How to remove the internal hose from the pump unit on X-TRA models.
Steps to remove the back cover and access the internal hose on X-TRA models.
To Next Page