Need help?Do you have a question about the Nilfisk-Advance E145.3 X-TRA and is the answer not in the manual?
Explains the motor/pump unit assembly, including torque and glue specifications.
Details the steps for removing and reattaching the front cabinet, including screw and hook placement.
Instructions for removing and reassembling the pump cover, noting foam and air barrier placement.
Procedures for removing and installing the start/stop valve and micro-switch box, with mounting torque reference.
Instructions for disassembling and assembling the motor/pump unit, including wire removal and screw removal.
Procedure for servicing the internal hose of the motor/pump unit, involving U-pin removal.
Instructions for mounting the bearing system and ball ring, and a picture of the open pump.
Guidance on correctly placing suction valves and verifying their level during pump reassembly.
Explains the motor/pump unit assembly, including torque and glue specifications.
Details the steps for removing and reattaching the front cabinet, including screw and hook placement.
Instructions for removing and reassembling the pump cover, noting foam and air barrier placement.
Procedures for removing and installing the start/stop valve and micro-switch box, with mounting torque reference.
Instructions for disassembling and assembling the motor/pump unit, including wire removal and screw removal.
Procedure for servicing the internal hose of the motor/pump unit, involving U-pin removal.
Instructions for mounting the bearing system and ball ring, and a picture of the open pump.
Guidance on correctly placing suction valves and verifying their level during pump reassembly.
General| Brand | Nilfisk-Advance |
|---|---|
| Model | E145.3 X-TRA |
| Category | Pressure Washer |
| Language | English |
To Next Page