25
E
Tools
Recommended oil types:
The pump is filled with 60 ml LHM 32 from the production.
In case of service where the oil must be changed Nilfisk-Advance recommends to
use 60 ml Bartram HV 46.
Alternative oil types that are allowed:
BP, Bartram HV 46
Shell, Tellus T 46
Exxon, Statoil Univis N 46
Mobil Oil Mobil DTE 25
Recommended lubrication:
White grease for o-rings, sealing etc.:
Silicone grease (Unisilkon L250) - All moveable parts and O-rings.
DOW CORNING(R) M 55 O-RING LUBRICANT - All stationary O-rings
Recommended glue:
Loctite 245, alternatively Loctite 243 (to lock the 4 pcs. Aluminum plugs in the
pump)
Tools:
Straight (flat) screwdriver (For lock clamps)
Torx 20 screwdriver (for all screws)
25 mm spanner (for the start / stop valve)
5 & 6 mm hex wrench (for pump bolts and nuts)
To Next Page
Loading...
Need help?
General
