EasyManua.ls Logo

Nilfisk-Advance MC 2C - Safety Precautions and Working Techniques; Introduction; Symbols Used to Mark Instruction

Nilfisk-Advance MC 2C
333 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
4
Original instructions
1 Introduction
1.1 Symbols used to mark instruction
All pictograms attached to the high pressure washer and its components are shown and ex-
plained in this manual.
Safety instructions marked with this symbol must be observed to prevent personal injury or
serious damage to property.
Caution where there is a risk of damaging the machine or its individual components.
This symbol indicates tips and instructions to simplify work and to ensure a safe operation of
the high pressure washer.
2 Safety precautions and working techniques
Before starting up your machine for the first time, this instruction manual must be read through
carefully. Save the instructions for later use.
WARNING!
Inhalation of aerosols can be hazardous to health.
Where applicable use a device in order to avoid or re-
duce aerosols production, e.g., a shield covering the
nozzle. For protection against aerosols use a respira-
tory mask of class FFP 2 or higher.
The high water pressure generated by the machine
and the power connection are particular sources of
danger.
Machines shall not be used by children or untrained
personnel. Children should be supervised to ensure
that they do not play with the machine.
Do not use the machine within range of persons un-
less they wear protective clothing.
Before starting up your machine please check it care-
fully for any defects. If you find any, do not start up
your machine, contact your Nilfisk distributor. The in-
sulation of the electric cable should be faultless and
without any cracks. If the electric cable is damaged,
an authorized Nilfisk di stributor should replace it.
Always unplug the power plug before cleaning or
maintenance and when replacing parts or converting
the machine to another function.

Table of Contents

Related product manuals