How to fix Nilfisk-Advance Floor Machine when the brooms do not clean correctly?
If the brooms on your Nilfisk-Advance Floor Machine aren't cleaning correctly, it may be because they are not adjusted correctly. If so, adjust them.
What to do if the water pump does not stop in Nilfisk-Advance Floor Machine?
If the water pump on your Nilfisk-Advance Floor Machine doesn't stop, the float may be stuck. If so, repair it.
What to do if the hopper lid does not open or close on Nilfisk-Advance Floor Machine?
If the hopper lid on your Nilfisk-Advance Floor Machine isn't opening or closing, the actuator may be faulty. If so, replace it.
General| Brand | Nilfisk-Advance |
|---|---|
| Model | RS 501 |
| Category | Blower |
| Language | English |
Explains the manual's purpose, scope, and intended audience.
Defines the intended users for operating and maintaining the machine.
Instructions on how to keep the manual safe and accessible.
Information on machine model and serial number locations.
Lists other manuals supplied with the sweeper.
Guidelines for maintenance and using original spare parts.
Nilfisk's policy on product improvements and modifications.
Explains the meaning of danger, warning, caution, and note symbols.
Provides crucial warnings for safe operation, maintenance, and handling.
Details the sweeper's design purpose and cleaning capabilities.
Explains directional references used in the manual.
Details the function of various indicators, lights, and switches on the control panel.
Describes the various levers, pedals, and controls within the operator's cab.
Lists and describes components visible from the side and rear of the machine.
Lists and describes components visible from the exterior, including cab and wheels.
Provides physical measurements and weight details of the machine.
Details operational performance metrics like speed, capacity, and sound levels.
Provides make, type, speed, power, and displacement of the diesel engine.
Details engine coolant and oil types, viscosities, and properties.
Lists fuel tank capacity and electrical system voltage/battery specs.
Provides pressure ratings and oil specifications for the hydraulic system.
Details climate control system gas and operating environmental conditions.
Lists electrical components and their corresponding designations in the wiring diagram.
Explains the color coding used for wires in the electrical system.
Identifies components within the hydraulic system diagram.
Details the fuses located in the control panel fuse boxes.
Lists optional equipment that can be fitted to the machine.
Highlights design features and conditions that can affect machine stability.
Outlines pre-operation checks including refueling and water levels.
Step-by-step instructions for safely starting the diesel engine.
Details the process for starting and stopping the engine.
Steps to prepare the machine for transport.
Steps to prepare the machine for sweeping operations.
Instructions for safely stopping the machine in transport mode.
Detailed steps to set up the machine for sweeping.
Instructions for safely stopping the machine in working mode.
Procedure for collecting large debris and managing the front skirt.
Step-by-step guide to safely empty the machine's hopper.
Instructions for using the optional rear suction pipe for debris collection.
How to operate the windscreen wiper and washer system.
Instructions for controlling the cab's heating system.
Guide to operating the optional cab climate control system.
How to operate the vehicle's lighting and hazard warning systems.
Procedure for manually lifting and lowering the hopper if the engine fails.
Safety procedure for installing pins when working under a lifted hopper.
Installation and removal of the safety pin for the hopper door.
Instructions for operating the optional high-pressure water system.
Steps to perform after completing work operations.
Procedure for draining the dust control system water tanks.
Instructions and warnings for towing the machine.
Guidance on safely anchoring the machine for trailer transport.
Procedures for storing the machine when not in use for extended periods.
Initial checks and procedures required after the first 8 hours of operation.
Introduction to the importance of maintenance and who should perform it.
Details maintenance tasks and their intervals based on operating hours.
Provides specific notes regarding maintenance procedures and intervals.
Steps for cleaning the hopper, suction pipe, and filters after use.
Procedures for cleaning dust control system nozzles and filters.
Instructions for cleaning nozzles within the suction inlet.
Procedure for cleaning the main water filter.
Guide for checking hydraulic oil level and drain filter efficiency.
Procedure for checking and cleaning the hydraulic system oil cooler fins.
Instructions for checking the battery's fluid level.
Procedure for checking the brake fluid level.
Verifying the operation of the reverse gear buzzer.
Instructions for checking and maintaining correct tire pressure.
Procedures for checking suction inlet wheels, skid plates, and skirt condition.
Guide for adjusting the suction inlet skirt height and opening force.
Procedure to check side broom height, tilting, and position.
Steps for adjusting broom height, tilting angles, and side position.
Instructions for safely replacing worn side broom bristles.
Procedure to check the proper operation of the parking brake.
Steps to check the engine oil level and add oil if necessary.
Instructions for performing an engine oil and filter change.
Procedure for replacing the engine oil filter.
Steps for cleaning the engine air filter and pre-filter.
Guidance on checking and cleaning the engine radiator fins.
Procedure for checking and topping up engine coolant.
Instructions for replacing the engine fuel filter.
Steps for replacing the air filter inside the operator's cab.
Detailed procedures for removing and installing front and rear wheels.
Steps for identifying and replacing blown fuses in the machine.
Steps for winterizing the machine or operating in cold conditions.
Explanation of the machine's built-in safety features and sensors.
Common problems with brooms and their solutions.
Troubleshooting steps for suction fan noise, inefficiency, or failure.
Solutions for debris collection, lifting, lowering, and skirt operation issues.
Remedies for hopper lifting, lowering, and panel operation problems.
Solutions for dust control nozzle issues and steering system faults.
Troubleshooting for brake system, stability, and wheel noise.
Solutions for reduced or absent machine drive power.
Troubleshooting for drive pedal movement and cab heating/cooling.
Solutions for problems preventing the diesel engine from starting.
Guidelines for properly scrapping the machine and its components.
To Next Page
