TROUBLESHOOTING
SC1500
ATTENTION! Do not use the machine before you have read and understood the User Manual
The machine
doesn’t work
as it should?
1 Check if the power cable is
correctly connected
The suction
doesn’t work
as it should?
1 Check the vacuum hose is
connected to the squeegee
The machine
doesn’t clean
as it should?
1 Check to have solution into the
tank
The brush
don’t work as they
should?
1 Check if the brush is correctly
installed and not worn out
2 Check the battery charge gauge
(and if necessary re-charge)
2 Open the recovery tank and
check if the gasket and
vacuum grid are cleaned
2 Check if you have the right water
setting
2 Check the brush is cleaned
3 Check if squeegee blades
are damaged or dirty
3 Check if there are external materials
avoiding brush rotating
4 Close the recovery tank
properly and/or verify the
gasket wear
3 Check if the filter is cleaned
5 Check to have suction
button activated
To Previous Page
Loading...
Need help?
General
