Nilfisk-Advance SC6000 - Page 33

D
Menu
Hours
Faults
Keys
Options
iExit
Select
D1
D1
FAULT CODE HISTORY
Every fault code that occurs is recorded by the machine and kept in a history log. See Figures 15A-15D. To view the fault history press the
Information Switch (D) to bring up the information menu. Use the four Navigation Arrows (D1) (up, down, left & right) to move through the menu
and the information switch to exit the menu.
Scroll down to Faults, right arrow to select.
Menu [Menu] ________________________________
Hours [Hours]
Faults [Faults]
Keys [Keys]
Options [Options] _______________________
Exit [i Exit]
Select [Select]
Scroll down to Fault History, right arrow to select.
Faults [Faults] ______________________________
Active Faults [Active Faults]
Fault History [Fault History]
___________________________________________
Back [Back] Select [Select]
A list of all faults and corresponding timestamp will be displayed, scroll up or
down to an individual fault, right arrow for more information.
Fault History [Fault History] __________________
Fault code Drive Hours
___________________________________________
Back [Back] Select [Select]
The fault is displayed along with the timestamp and description. Use the up and
down arrows to scroll through the list of faults.
Fault History [Fault History] _________________
Fault Code Drive Hours
Fault Code Description
___________________________________________
Back [Back] Scroll [Scroll]
FIGURE 15A
FIGURE 15B
FIGURE 15C
FIGURE 15D
Fault History
1-003 0007.7
Back
Scroll
(1/5)
K1 Contac t Weld
Fault History
1-003 0007.7
Back
Select
(1/5)
3-001 0005.2
3-001 0005.2
3-001 0004.3
Faults
Active Faults 0
Fault History 5
Back
Select
4/2016 A - 33 56091168 - SC6000
ENGLISH - AINSTRUCTIONS FOR USE