11
1)
Options / model variants
Original instruction
NEPTUNE 1, NEPTUNE 2
NEPTUNE 2 Special
3.7 Electrical connection
Before connecting devices with
voltage changeover
1)
: Check that
the pre-selected voltage on the
machine corresponds with the
voltage of the electrical instal-
lation. Otherwise the electrical
devices of the machine can be
destroyed.
CAUTION!
When using cable reels:
1. Due to the risk of overheat-
ing and fire, always unwind
the power supply cord fully.
The cleaner may only be con-
nected to a correctly installed
electrical installation.
1. Observe safety instructions in
chapter 1.
2. Put the plug into the electrical
socket.
3.8 Antifreeze - before first
use
The machine is protected with
anti-freeze from the factory.
400V 400V
230V
230V
Catch the liquid discharging at
first (approx. 5 l) for re-use in a
container.
To Next Page
Loading...
Need help?
General
