EN
ENGLISH
Nilfi sk ALTO Operator’s Manual (EN) - SCRUBTEC 866, 871, 866, Boost 8 and 871C FORM NO. 71492A - 53 -
BRUSH HEAD ASSY - SCRUBTEC 871
Item Ref. No. Qty Description
1 722030 1 Clamp, Hose
2 782002 2 Clamp, Manifold
3 920248 2 Nut, 3/8-16. Esna, Jam
4 962244 8 Screw, 3/8-16 X .75 Hex
5 962714 2 Screw, Gimble Mount
6 980638 9 Washer, 3/8 Lock
7 980645 2 Washer, 3/8” S.A.E. Flat
8 980648 1 Washer 17/32 X 1 1/16 Plain
9 56109717 1 Tube Jack Motor
10 30412A 1 Hose, Solution
11 30574A 1 Brush Housing L.H.
12 30575A 1 Brush Housing R.H.
13 34705A 2 Hose, Solution 6.00” Lg.
14 38014A 1 Splitter, Solution
[15] 40645A 4 Connector, Housing
16 44809B 2 Motor, Brush
17 50248A 2 Clamp, Hose
18 53571A 1 Clamp, Hose
19 57994A 2 Screw, M6- 1 X 20
20 59856A 2 Washer, Rubber
21 59950A 1 Wheel, Guide 3 1/2”
22 61924A 1 Plate,28” Brush Wldmt
23 61926A 1 Bracket, Head Lift
24 71017A 2 Label, Moving Parts
25 80183A 3 Bolt, M8-1.25 X 20, Hex
26 80198A 3 Nut, M8 -1.25 Nylock S.S.
27 80199A 4 Nut, M6 -1.00 Nylock S.S.
28 85610A 1 Screw, 3/8-16 X 2.5” P.H.
29 88612A 8 Washer, Lock M10
30 88617A 8 Screw, M10xm12x16mm S.B.S.H.
31 88618A 1 Nut, M12 Nylon Insert
32 88619A 1 Screw, M12-1.75 X 160mm Hex
33 88623A 4 Nut, M4-.7 Nylock Insert
34 88627A 2 Screw, M6-1 X 40mm Ph
35 55721A 1 Draw Latch
36 55451A 1 Keeper, Latch
37 80223A 8 Nut, M10-1.5 Nylock
38 E04016 2 Spring
39 69186A 1 Tab, Latch, Brush
40 964002 4 Screw, M4-.7x16mm Ph
41 56382665 2 Gimbal-Collar Assembly
42 9097008000 8 Bush Flanged Gfm 1214-15
43 56382618 4 Lever Kit
44 38036A 2 Driver, Pad 14” Gimbal
[ ] = Not Shown
revised 12/11
To Next Page