To Next Page
M
monique34Jul 30, 2025
Why is my Nilfisk-ALTO SCRUBTEC R 466 not working?
- KkcarterJul 30, 2025
Your Nilfisk-ALTO Scrubber might not be working due to several reasons: * The batteries may be discharged or have poor connections – charge the batteries or clean the connections. * The batteries may be broken – check the battery no-load voltage. * The battery charger may be broken – replace it. * The fuses may be open – replace them. * The wiring harness may be damaged – repair it. * The ignition key may not be working – replace it.
General
