To Next PageTo Next Page
Need help?Do you have a question about the Nilfisk-ALTO SCRUBTEC R 571 and is the answer not in the manual?
General| Brand | Nilfisk-ALTO |
|---|---|
| Model | SCRUBTEC R 571 |
| Category | Scrubber |
| Language | English |
Important safety guidelines to follow during machine operation and maintenance.
Procedures for unpacking and handling the machine upon delivery.
Step-by-step guide for installing the machine's battery pack.
Guidelines for maintaining battery health and performance.
Procedure for safely charging the machine's batteries.
Explanation of the battery charge level indicators on the display.
Steps for attaching the squeegee assembly to the machine.
Instructions for adjusting the squeegee blade for optimal performance.
Procedure for replacing or rotating brushes on the cylindrical head.
Guide for fitting brushes or pads onto the BOOST machine head.
Steps for detaching brushes or pads from the BOOST machine head.
Restoring the machine's settings to factory defaults.
Instructions for manually moving the machine when power is off.
Information on the non-adjustable seat for standard models.
Details on adjusting the deluxe seat for operator comfort.
Understanding the battery status indicated on the LCD display.
Navigating through different screens on the machine's LCD display.
Identifying the indicator for low solution levels.
Identifying the indicator for a full recovery tank.
Using the squeegee and vacuum motor controls.
Adjusting the amount of cleaning solution dispensed onto the floor.
Adjusting the downward pressure of the brushes on the floor.
Controlling the machine's movement direction.
Procedure for adding cleaning solution to the tank.
Pre-operation checks before starting a work session.
Steps for standard floor cleaning operations.
Specific steps for cleaning heavily soiled floors.
Post-operation shutdown and cleaning procedures.
Routine weekly maintenance tasks for the machine.
Procedures for inspecting and cleaning the battery terminals and tops.
Steps to clean the recovery tank and its filter.
Instructions for cleaning the solution tank and filter.
How to drain the solution tank manually.
Using vacuum assist to drain the solution tank.
General maintenance for the squeegee, including inspection.
Steps to replace the front squeegee blade.
Steps to replace the rear squeegee blade.
How to rotate squeegee blades for longer life.
Procedures for cleaning the machine's vacuum hoses.
List of available brushes and pad drivers for different models.
List of replacement squeegee blades for various models.
Optional kits that can be installed in the field.
Exploded views and parts lists for the overall machine final assembly.
Drawings and parts lists for the main frame across different models.
Drawings and parts lists for optional side squeegee lift and front wheel assemblies.
Drawings and parts lists for the recovery and solution tank assemblies.
Drawings and parts lists for the steering column assembly.
Drawings and parts lists for rotary, cylindrical, and BOOST brush head assemblies.
Drawings and parts lists for main, front, and front arm squeegee assemblies.
Exploded view and parts list for the electrical panel.
Electrical connections and ground points for optional features.
