EasyManua.ls Logo

Nilfisk-ALTO SC100 - User Manual

Nilfisk-ALTO SC100
41 pages
Save Page as PDF
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
Loading...
SC100 - SCRUBTEC 130
Service Manual
Nilsk SC100, 107408100 - 107408102 - 107408103
Nilsk Alto Scrubtec 130, 107408140 - 107408150 - 107408152
English
04/2015 (1) Form No. 107415442

Table of Contents

Questions and Answers

  • C
    Courtney WoodAug 1, 2025
    Why is the dirty water vacuuming insufficient in my Nilfisk-ALTO Scrubber?
    • C
      Christopher HarrisonAug 1, 2025
      Insufficient dirty water vacuuming in your Nilfisk-ALTO Scrubber can be caused by a few things. The recovery tank might be full and needs emptying. The squeegee bars could be dirty, or the blades might be worn or damaged, so you should clean and check them. Also, the inspection compartment could be dirty and require cleaning. Check if the vacuum hose is disconnected or dirty, and connect or clean it. Finally, the air filter might be dirty and need cleaning.
  • B
    Brett VazquezAug 11, 2025
    How to fix insufficient solution flow to the brush of my Nilfisk-ALTO Scrubber?
    • N
      Nicole RodriguezAug 12, 2025
      If the solution flow to the brush of your Nilfisk-ALTO Scrubber is insufficient, consider these potential causes: the solution filter might be dirty and needs cleaning, the dosing bridge could be clogged and require cleaning, or the solenoid valve may be broken and needs replacement.
  • D
    Dwayne ShermanAug 21, 2025
    What to do if squeegees leave marks on the floor when using my Nilfisk-ALTO Scrubber?
    • J
      Joseph RogersAug 21, 2025
      If the squeegees are leaving marks on the floor while using your Nilfisk-ALTO Scrubber, it might be due to debris under the squeegee blades, which needs to be removed. Alternatively, the squeegee blades might be worn, chipped, or torn, requiring replacement.

Summary

General Information

Service Manual Purpose and Field of Application

Service and Spare Parts

Safety Guidelines

Introduces safety symbols and general precautions for safe operation and accident prevention.

Machine Symbol Identification

Explains symbols found on the machine itself, like slope gradient warnings.

Manual Symbol Definitions

Defines warning symbols used within the manual (Danger, Warning, Caution, Note).

Operational Safety Warnings

Provides specific warnings and cautions regarding potential damages to people and the machine.

Usage and Environmental Precautions

Continues safety instructions for machine operation, child safety, and environmental considerations.

Electrical System

Wiring Diagram Overview

Motor Assembly Removal and Installation

Step-by-step guide for removing and installing the motor assembly of the machine.

Electronic Control Board Servicing

Solution System

Dosing Pump Replacement Procedure

Cylindrical Brush System

Belt and Pulley System Maintenance

Nilfisk-ALTO SC100 Specifications

General IconGeneral
ModelSC100
TypeUpright Scrubber Dryer
BrandNilfisk-ALTO
Cleaning Width310 mm
Weight12 kg
Brush Speed2100 rpm
Voltage230 V
Scrubbing Width310 mm
Net Weight12 kg
Brush Width310 mm
Working Width310 mm
Power SourceElectric
Noise Level68 dB

Related product manuals