11
UNO / DUO BOOSTER BASIC
Original Instructions
2. Stop pump no. 1. Then start
pump no. 2 and let the water
run from an outlet point of
the pipeline.
When connecting the high
pressure hose directly to the
machine, activate the trigger
of the spray handle without
having attached the spray
lance.
Let the water run until all air
has escaped from the pump
(even water flow).
3. Vent the pipeline by starting
one pump and then let the
water run at each outlet
point of the pipeline at turns
until all air has escaped from
the system.
3.7 Venting (continued)
To Next Page
Loading...
Need help?
General
