Need help?Do you have a question about the Nilfisk-ALTO UNO BOOSTER BASIC and is the answer not in the manual?
General| Brand | Nilfisk-ALTO |
|---|---|
| Model | UNO BOOSTER BASIC |
| Category | Pressure Washer |
| Language | English |
Explanation of symbols used to mark safety instructions and important tips for safe operation.
General safety advice, warnings, and precautions for operating the high-pressure washer.
Details the professional application areas for this high-pressure washer in various industries.
Identifies and illustrates the main operational components of the UNO and DUO BOOSTER models.
Specifies the required temperature ranges and maximum ambient temperature for machine installation.
Details the necessary free wall space and clearance around the machine for cooling and service.
Provides guidelines for mounting the UNO BOOSTER and placing the DUO BOOSTER on a floor.
Explains how to connect the machine to a water supply network or internal water supply.
Details requirements for connecting the machine to the electrical power supply, including safety checks.
Describes how to connect to a pipeline or directly to the machine's outlet.
Instructions on how to vent the system to remove air before operation for both UNO and DUO models.
Details connecting the high pressure hose directly to the machine or to an outlet point.
Instructions for attaching the high pressure hose to the machine's outlet connection via quick coupling.
Guidance on connecting the high pressure hose to a pipeline with fixed outlet points.
Steps for attaching spray lances and other accessories to the spray handle using quick couplings.
Information on choosing the right spray lance and nozzle type based on pressure and water volume.
Describes using external injectors for dosing detergents or disinfectants with different outlet points.
Details the optional internal detergent addition system and its dosage settings.
Step-by-step instructions for starting the UNO and DUO BOOSTER models, including pressure checks.
Explains how the machine automatically starts when the trigger is activated and stops when released.
Describes the double spray lance, high/low pressure modes, and how to regulate pressure.
Instructions on how to safely stop the machine, including relieving pressure.
Guidance on protecting the machine from frost damage during installation and storage.
Lists the primary application fields for the high-pressure washer, such as agriculture and industry.
Explains the use of low, high, and intermediate pressure for different cleaning tasks and detergent application.
Information on using detergents with the system, including types, dosage, and application methods.
Provides general rules and pH value guidelines for using detergents with the cleaning equipment.
Details the '2-step method' and provides advice for optimal cleaning results with detergents.
Instructions for checking the oil level in the oil glass and what to do if it is low.
Guidance on cleaning the fine water inlet filter and the coarse filter in the water tank.
Steps to clean a clogged nozzle, emphasizing safety precautions during the process.
Information on proper disposal of parts affecting the environment and polluting materials.
Lists reasons and actions for when the machine fails to start, including fuse and power issues.
Identifies causes for fuses blowing on the DUO BOOSTER and recommended actions.
Addresses causes for low pressure, such as worn nozzles or incorrect settings, and their solutions.
Explains reasons for pressure fluctuations like water temperature or supply issues and how to resolve them.
Covers issues like clogged nozzles or insufficient water supply and their respective solutions.
Addresses the problem of the machine starting and stopping intermittently, often due to leaks.
Identifies oil shortage in the pump as a reason for the machine starting and then stopping.
Specifies the pump pressure (bar) for both UNO and DUO BOOSTER models.
Details the water volume (l/min) and min/max pressure ratings for the machines.
Specifies the volume of the water tank in liters for UNO and DUO BOOSTER models.
Provides the maximum and minimum pressure limits for the inlet water connection.
Specifies the maximum allowable temperature for the inlet water.
Indicates the type of nozzle (high pressure/low pressure) used with the spray lance.
Specifies the maximum thrust (N/kp) generated by the spray lance during operation.
Lists the maximum permissible lengths for high pressure hoses based on diameter.
Identifies the type of oil recommended for the machine's lubrication.
Specifies the required quantity of oil for the machine's lubrication.
Outlines the 12-month guarantee period and the conditions under which it is valid.
To Next Page