22
UNO / DUO BOOSTER BASIC
Original Instructions
6.3 Cleaning of high
pressure nozzle
A clogging up in the nozzle
causes a pump pressure which
is too high, and a cleaning is
immediately
required.
1. Stop the cleaner and detach
the spray lance.
2. Clean the nozzle.
IMPORTANT: ONLY use the
cleaning tool when the spray
lance is detached.
3. Flush the spray lance
backwards with water.
4. If the pressure is still too
high, repeat items 1-3.
6.4 Disposable waste This high pressure washer
consists of parts which can
affect the invironment when
thrown away. Parts that can
pollute are as follows:
Oil, painted/zinc-coated parts,
plastics/plastic-coated parts.
Therefore, it is important to
follow the laws concerning
the removal of polluting and
dangerous materials when
replacing spare parts or
disposing of high pressure
washer.
It is recommended that you
bring the rejected parts to
waste disposal areas or
recycling plants that are
approved for the destruction of
these types of materials.
To Next Page
Loading...
Need help?
General
