19
UNO / DUO BOOSTER BASIC
Original Instructions
For foam cleaning you will
have to attach a special foam
equipment. Insert the suction
hose of the injector into the
foam detergent.
General rules for
addition of detergents
Nilfisk-ALTO cleaning
equipment can be used for all
detergents and disinfectants,
which are suitable for high
pressure cleaning according to
the prescriptions of the supplier.
(If using external injector, the
pH-value should be between 4
and 14. If using internal addition
of chemicals, the pH-value
MUST be between 5.5 and
8.5). Acid and lye should not be
applied in a concentrated form.
Carefully observe the
prescriptions and guidelines
of the supplier, also the rules
concerning safety clothing and
drainage facilities.
Detergents which are not
exactly prescribed for use in
conjunction with high pressure
cleaning must only be used
upon a previous approbation
from Nilfisk-ALTO and the
supplier.
The use of Nilfisk-ALTO
detergents ensures that
machines, accessories and
detergents match, which is the
condition of an optimal solution
of a cleaning task.
Nilfisk-ALTO can offer you a
wide range of efficient agents
for cleaning and disinfection.
The products are composed
of substances which combine
efficiency and environmental
considerations at one and the
same time.
5.3 Detergents
(continued)
Attach the foam lance on the
spray handle and now you are
ready for foam application.
Upon the application open
the by-pass cock of the foam
injector and replace the foam
lance by a spray lance, and you
are ready for cleaning.
To Next Page
Loading...
Need help?
General
