Ninja BL700C

Questions and Answers:

A
Alicia GillespieAug 15, 2025
What to do if my Ninja BL700C motor doesn't start?
- S
  Savannah ScottAug 15, 2025
  If the motor of your Ninja Food Processor doesn't start or the attachment doesn't rotate, ensure the container is securely placed on the motor base and the lid is correctly positioned and securely on the container. Also, verify the appliance is turned on by pressing the power button. Check that the plug is securely inserted into the electrical outlet and inspect the fuse or circuit breaker. If the unit has overloaded, unplug it and wait about 15 minutes before using it again. If the unit has overheated, unplug it and wait 15 minutes to reset. Make sure the power button is a solid red and that the unit is assembled correctly and not overloaded.
M
Mary MillerAug 18, 2025
What to do if my Ninja Blender motor doesn't start?
- T
  tiffany63Aug 19, 2025
  If the Ninja Blender's motor doesn't start or the attachment doesn't rotate, ensure the container is securely placed on the motor base and the lid is correctly positioned and secured. Check that the appliance is turned on by pressing the power button. Also, verify the plug is properly inserted into the electrical outlet and check the fuse or circuit breaker. If the unit has overloaded or overheated, unplug it and wait approximately 15 minutes before using it again. Confirm the power button is a solid red color and that the appliance is assembled correctly, making sure the unit is not overloaded.
M
Michelle AndrewsAug 21, 2025
How to fix unevenly chopped food in Ninja BL700C Food Processor?
- D
  David BirdAug 21, 2025
  If food is unevenly chopped in your Ninja Food Processor, you may be chopping too much food at one time, or the pieces may not be of even size. Try processing smaller amounts per batch.
H
hsanchezAug 26, 2025
What to do if food is too watery in Ninja BL700C?
- F
  flesterAug 26, 2025
  If the food is chopped too fine or is too watery when using your Ninja Food Processor, it has likely been over-processed. Use the pulse button for more controlled processing.
D
Debbie OrtizAug 28, 2025
Why won't the motor base of my Ninja Blender stick to the counter?
- J
  Jordan SmithAug 29, 2025
  If the motor base of your Ninja Blender won’t stick to the counter or table top, make sure the surface is wiped clean. Note that the suction feet will only adhere to smooth surfaces. Do not attempt to use the appliance when the motor base is stuck to a surface that is not secure, such as a cutting board, platter, or plates.
C
Carlos CrawfordSep 1, 2025
Why won't the motor base of my Ninja BL700C stick to the counter?
- L
  Laura HallSep 1, 2025
  If the motor base of your Ninja Food Processor won’t stick to the counter or tabletop, make sure the surface is clean. Note that the suction feet will only adhere to smooth surfaces. Do not attempt to use the appliance when the motor base is stuck to a surface that is not secure, such as a cutting board, platter, or plates.
M
Matthew GallegosSep 4, 2025
Why can't I get snow from solid ice in my Ninja BL700C?
- R
  Rebecca BartlettSep 4, 2025
  If you cannot achieve snow from solid ice in your Ninja Food Processor, do not use ice that has been sitting out or has started to melt. Use ice straight from the freezer.
K
Kathleen BryanSep 7, 2025
How to fix uneven chopping in my Ninja Blender?
- D
  Dwayne PittsSep 7, 2025
  If food is unevenly chopped in your Ninja Blender, it could be due to chopping too much food at once, or the pieces may not be of a uniform size. Try processing smaller amounts per batch.
J
Jessica WilliamsSep 12, 2025
What to do if food is too watery after using Ninja Blender?
- L
  laceylewisSep 12, 2025
  If food is chopped too fine or becomes too watery in your Ninja Blender, it has likely been over-processed. To prevent this, use the pulse button for more controlled processing.