12
www.ninjakitchen.com
HOW TO CLEAN
CAUTION: Make sure that the motor base is
unplugged from the power source before inserting
or removing any attachment and before cleaning.
CAUTION: DO NOT immerse the motor base into
water or any other liquid.
1 Separate/remove all parts from each other.
2
Hand Washing: Wash the containers, lids and blade
assemblies in warm, soapy water. When washing the
blade assemblies, use a dish-washing utensil with a
handle to avoid direct hand contact with blades. Handle
blade assemblies with care to avoid contact with sharp
edges. Rinse and air dry thoroughly.
Dishwasher: The containers, lids, blade assemblies
and attachments are all dishwasher safe. The lids and
blade assemblies are top rack dishwasher safe. Ensure
the blade assembly is removed from the container
before placing in the dishwasher.
WARNING: Handle the Blade Assemblies with
care when washing, as the blades are sharp.
Contact with the blades’ edges can result in
laceration.
3
Wipe the motor base clean with a damp cloth
.
Please call customer service if any servicing needs to be
performed on the appliance at 1-877-646-5288.
Care & Maintenance
HOW TO STORE
1 Store the Ninja
®
Ultra Kitchen System upright with
the blade assembly inside the corresponding container
with the lid secured on top. Do not place anything on
top. Store the rest of the attachments in a safe place
where they will not be damaged and won’t cause harm.
Loosely w
rap the power cord around the cord wrap on the
back of the motor base.
RESETTING THE MOTOR THERMOSTAT
The Ninja
®
Ultra Kitchen System features a unique safety
system which prevents damage to the unit’s motor and drive
system should you inadvertently overload your appliance.
If the appliance is being overloaded, the motor will
stop. Allow the appliance to cool for approximately
15 minutes. To reset the appliance, follow the resetting
procedure below:
1
Unplug the appliance from the electrical outlet.
2
Remove and empty the container and ensure that no
food is jamming the blade assemblies.
3
Allow the appliance to cool for approximately 15
minutes.
4
Re-install the container onto the base and re-plug the
appliance into the electrical outlet.
5
Proceed to use the appliance as before making sure not
to exceed the recommended maximum capacities.
To Next Page
Loading...
Need help?
General
