EasyManuals Logo

Ninja BL780CO User Manual

Ninja BL780CO
16 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #6 background imageLoading...
Page #6 background image
5
1-877-646-5288
Before First Use
CAUTION:
Do not immerse the motor base into
water or any other liquid.
1 Remove all packaging material and labels from the
appliance. Separate/remove all parts from each other.
2 Wash the lids, pitcher, bowl, Nutri Ninja
®
cups and
Blade Assemblies in warm, soapy water. When washing
the blade assemblies, use a dish-washing utensil with a
handle to avoid direct hand contact with blades.
WARNING: Handle the Blade Assemblies with
care when washing, as the blades are very sharp.
3 Handle blade assemblies with care to avoid contact
with sharp edges. Rinse and air dry thoroughly.
4 The pitcher, bowl, Nutri Ninja cups, lids and Blade
Assemblies are all dishwasher safe. It is recommended
that the lids and Blade Assemblies be placed on the top
rack. Ensure that the blade assemblies are removed
from the containers before placing in the dishwasher.
5 Wipe the motor base clean with a damp cloth.
PLEASE KEEP THESE IMPORTANT
SAFEGUARDS IN MIND WHEN USING THE
APPLIANCE:
IMPORTANT: Make sure that the motor base
is plugged in for use.
IMPORTANT: Never add ingredients into the
container before placing the Blade Assembly
in first.
IMPORTANT: Blade Assemblies are not
interchangeable.
IMPORTANT: DO NOT attempt to operate the
appliance without the lid on.
IMPORTANT: Never run the appliance empty.
IMPORTANT: Appliance accessories are not
intended to be used in the microwave as it
may result in damage to the accessories.
WARNING: Stacked Blade
Assembly is sharp and not
locked in place. If using the
pour spout, ensure the lid is
fully locked onto the pitcher.
Failure to do so will result in a
risk of laceration.
WARNING: Stacked
Blade Assembly is sharp
and not locked in place.
If pouring with the lid
removed, carefully remove
the Stacked Blade Assembly
first, holding it by the shaft.
Failure to do so will result in
a risk of laceration.
WARNING: Chopping
Blade Assembly is sharp and
not locked in place. Before
emptying contents carefully
remove lid and Chopping
Blade Assembly, holding it by
the shaft. Failure to do so will result in a
risk of laceration.

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Ninja BL780CO and is the answer not in the manual?

Ninja BL780CO Specifications

General IconGeneral
BrandNinja
ModelBL780CO
CategoryBlender
LanguageEnglish

Related product manuals