10
ninjacoffeebar.com
English
Assembly
1 Place the brewer on a dry, clean and level surface.
2 To easily fill the water reservoir, use the hand grips to lift
it straight up off the brewer. (Fig. 5) The water reservoir
lid flips open for easy filling, and the entire lid is easily
removable for quick cleaning. Add fresh, filtered water at
or above the minimum fill line for your desired beverage
size (Fig. 6), then return the water reservoir to the brewer
and lock into place. (Fig. 7) Do not fill water reservoir
with any other liquids such as brewed coffee, carbonated
beverages, etc. as other liquids may damage your brewer.
3 Slide brew basket out (Fig. 8) and lift both the
permanent filter and Removable Filter Holder from the
brew basket to remove. (Fig. 9) To reinsert, set the
permanent filter and Removable Filter Holder back into
the brew basket. (Fig. 10) When cleaning, you can
remove the permanent filter from the brew basket.
4 Once the filter is in place, slide the brew basket all the
way in until you hear a slight click.
Fig. 5
Fig. 8
Fig. 6
Fig. 9
Fig. 7
Fig. 10
To Next Page
Loading...
