9 Wait for the unit to come
to a complete stop before
removing the pitcher from
the motor base.
To remove the pitcher,
turn it counterclockwise
and lift it up.
10 For thinner mixtures, ensure
the lid is locked into place,
open the pour spout cap
on the lid, and empty the
contents of the pitcher
through the pour spout.
11
For thicker mixtures that
cannot be emptied through
the pour spout, remove
the lid and Stacked Blade
Assembly before pouring.
To remove the lid, press
the RELEASE button on
the lid and lift the handle.
The lid can then be
removed from the pitcher.
To remove the Stacked
Blade Assembly, carefully
grasp it by the top of the
shaft and remove from the
pitcher. The pitcher can
then be emptied.
12 Unplug the unit when
finished and release the
motor base from the work
surface. Refer to page 15
for storing instructions.
To Next Page
Loading...
Need help?
General