SAVE THESE INSTRUCTIONS
35 If you find unmixed ingredients sticking to
the sides of the pitcher, stop the appliance,
remove the lid, and use a scraper or
spatula to dislodge ingredients. NEVER
insert your hands into the pitcher, as
you may contact one of the blades and
experience a laceration.
36 DO NOT attempt to remove the container
and lid from the motor base while the
motor and Stacked Blade Assembly are still
spinning. Allow the appliance to come to a
complete stop before removing the lid and
pitcher.
37 Upon completion of blending, ensure
the Stacked Blade Assembly is removed
BEFORE emptying pitcher contents. The
Stacked Blade Assembly is to be removed
by grasping the top of the shaft and lifting
from the pitcher. Failure to remove the
Stacked Blade Assembly before emptying
the pitcher can result in a risk of laceration.
38 If the appliance overheats, a thermal switch
will activate and temporarily disable the
motor. To reset, unplug the appliance
and allow it to cool for approximately 15
minutes before using again.
39 The maximum wattage rating for this
appliance is based on the configuration
of the Stacked Blade Assembly and Total
Crushing
®
Pitcher. Other configurations
may draw less power or current.
40 DO NOT spray the motor base or
touchscreen with water or other liquids.
41 Turn off the appliance and unplug the
motor base before cleaning.
To Next Page
Loading...
Need help?
General