17 181-877-646-5288 ninjakitchen.com
USING YOUR HIGH-SPEED
BLENDER CUP
IMPORTANT: Review all
warnings on pages 3–6
before proceeding.
TIP: To learn more about
the unit’s programs, refer
to page 11.
NOTE: Pre-set programs
have pauses and changes in
speed throughout the cycle.
1 Place the unplugged motor
base on a clean, dry, and
level surface such as a
countertop or table. Press
downward on the motor
base to adhere the suction
cups to the work surface.
Plug the motor base into a
wall outlet.
2 Add ingredients to the
High-Speed Blender Cup.
DO NOT add ingredients
past the MAX LIQUID line
on the cup.
3 Install the Pro Extractor Blades
®
Assembly
onto the top of the cup. Twist the lid
clockwise until it’s sealed tightly.
4 Turn the High-Speed Blender Cup upside
down and install onto the motor base.
Align the tabs on the cup with the slots
on the base, then twist until it clicks
into place. When the unit is connected
to power and the container is correctly
locked onto the motor base, the available
program buttons will illuminate and the unit
will be ready for use.
To Next Page
Loading...
