25 261-877-646-5288 ninj akitch en.com
IMPORTANT: Only use
LOW when using the
Slicing/Shredding Disc.
NOTE: The feed chute lid
features a two-part pusher
to guide food through the
chute. Use the full pusher
for larger items such as
cucumbers. Twist and
pull to remove the smaller
pusher and use the narrow
chute for smaller items
such as carrots.
NOTE: The Slicing/
Shredding Disc is
reversible. Use the side
labeled “Slicer” for Slicing.
Carefully flip the disc
over to the side labeled
“Shredder” for shredding.
USING YOUR
SLICING/SHREDDING DISC
IMPORTANT: Review all
warnings on pages 3-6
before proceeding.
1 Place the motor base on
a clean, dry, level surface
such as a counter or
tabletop. Press down on
the motor base to make
sure that the suction cups
adhere to the counter or
tabletop.
2 Secure the bowl onto the
motor base.
3 Place the spindle inside
the bowl.
4 Use the finger holes to
grasp the disc and place it
over the spindle.
5 Place the feed chute lid
on the bowl and turn
clockwise until you hear a
click, indicating the lid is
locked in place.
6 Plug the power cord into
the electrical outlet and
press the power button to
turn the unit on.
7 Select LOW on the control
panel. The disc will begin
spinning.
To Next Page
Loading...
