Ninja MAX XL Instructions

12 13SG ninjakitchen.sg | MY ninjakitchen.my
SG +65 800 120 5111 | MY +60 1800 803 915
USING YOUR AIR FRYER MAX XL – CONT.
Reheat
1 Ensure the crisper plate is in the pan.
2 Press the REHEAT button. The default
temperature setting will display. Press
the TEMP up and down arrow buttons
to set your desired temperature.
3 Press the TIME up and down arrow
buttons to set the reheating time.
4 Add ingredients to the pan. Insert the
pan in the unit.
5 Press START/STOP to begin reheating.
6 When reheating is complete, the unit
will beep and End will appear on the
control panel display.
7 Remove ingredients by tipping them
out or by using oven gloves or silicone-
tipped tongs/utensils.
AIR FRYMAX CRISP ROAST
START
PAUSE
AIR FRYMAX CRISP ROAST
AIR FRYMAX CRISP ROAST
AIR FRYMAX CRISP ROAST
Dehydrate
1 Place your first layer of ingredients in
the bottom of the pan. Then install the
crisper plate inside the pan and set
a second layer of ingredients on the
crisper plate.
2 Insert the pan in the unit.
3 Press the DEHYDRATE button. The
default temperature will display. Use the
TEMP up and down arrow buttons to set
your desired temperature.
NOTE: You can increase your
dehydrating capacity with the mid-
level rack. If the rack is not included
with your model, it is available for
purchase at
AU ninjakitchen.com.au –
NZ ninjakitchen.co.nz
4 Press the TIME up and down arrow buttons
to set your desired dehydrating time.
5 Press START/STOP to start dehydrating.
6 When dehydrating is complete, the unit
will beep and End will appear on the
control panel display.
AIR FRYMAX CRISP ROAST
START
PAUSE
AIR FRYMAX CRISP ROAST
AIR FRYMAX CRISP ROAST
AIR FRYMAX CRISP ROAST

Ninja MAX XL Specifications

General

Model	AF161
Capacity	5.5 quarts
Wattage	1750 watts
Cooking Programs	6
Dishwasher Safe Parts	Yes
Warranty	1 year limited
Functions	Air Fry, Bake, Reheat, Dehydrate
Temperature Range	105°F–450°F