Ninja NJ100 series - Using the Ninja Express Chop

7
1-877-646-5288
Using the Ninja
®
Express Chop
CAUTION: Blades are sharp! Use extreme caution
when handling the blades. Always hold them by the
shaft.
IMPORTANT: Never run the appliance empty.
CAUTION: DO NOT PROCESS HOT FOODS
OR HOT LIQUIDS. Allow hot ingredients to cool
before processing.
1 Place the processor bowl on a clean, dry, level
surface.
2 Holding the chopping blade by the shaft, carefully
place it over the spindle pin inside the processing
bowl. (Fig. 1)
IMPORTANT: Always assemble the blades inside
the container.
WARNING: DO NOT try to place the blades onto
the power head and then into the Ninja
®
Express
Chop.
3 Carefully spin the blade anticlockwise to make sure
that it has inserted properly. (Fig. 2)
4 Place the food ingredients into the bowl.
IMPORTANT: Never add ingredients into the
processing bowl before placing the blade assembly
in first.
CAUTION: DO NOT add ingredients past the
450 ml mark or 250 ml liquid ingredients as this
may cause overflow.
5 Place the splash guard / storage lid on the bowl.
(Fig. 3)
CAUTION: DO NOT operate without the splash
guard in place.
6 Open the flap on the splash guard. (Fig. 3)
Shaft
Fig. 1
Fig. 2
Fig. 3
Open Flap