5
1-877-646-5288
CAUTION:
Do not immerse the motor base into
water or any other liquid.
1 Remove all packaging material and labels from the
appliance. Separate/remove all parts from each other.
2 Wash the lid, pitcher and Stacked Blade Assembly in
warm, soapy water. When washing the Stacked Blade
Assembly, use a dishwashing utensil with a handle to
avoid direct hand contact with blades.
WARNING: Handle the Stacked Blade Assembly
with care when washing, as the blades are very
sharp.
3 Handle blade assemblies with care to avoid contact
with sharp edges. Rinse and air dry thoroughly.
4 The pitcher, lid and Stacked Blade Assembly are all
dishwasher safe. It is recommended that the lid and
Stacked Blade Assembly go on the top rack. Ensure
that the Stacked Blade Assembly is removed from the
pitcher before placing in the dishwasher.
5 The motor base can be wiped clean with a damp cloth.
Before First Use
PLEASE KEEP THESE IMPORTANT
SAFEGUARDS IN MIND WHEN USING THE
APPLIANCE:
IMPORTANT: Make sure that the motor base
is plugged in for use.
IMPORTANT: Never add ingredients into the
container before placing the Blade Assembly
in first.
IMPORTANT: DO NOT attempt to operate the
appliance without the lid on.
IMPORTANT: Never run the appliance empty.
IMPORTANT: Appliance accessories are not
intended to be used in the microwave as it
may result in damage to the accessories.
WARNING: Stacked
Blade Assembly is
sharp and not locked in
place. If using the pour
spout, ensure the lid
is fully locked onto the
pitcher. Failure to do so
will result in a risk of
laceration.
WARNING: Stacked
Blade Assembly is sharp
and not locked in place.
If pouring with the lid
removed, carefully
remove the Stacked
Blade Assembly first,
holding it by the shaft. Failure to do so
will result in a risk of laceration.
To Next Page
Loading...
Need help?
General
