7
1-877-646-5288
Fig. 6
9 Review warning and caution statements on page 6
before proceeding.
10 Holding the lid by the handle in the upright position,
place it on top of the pitcher aligning the arrow ( )
located on the lid with the arrow ( ) located on the
bowl’s handle. (Fig. 5)
11 Select the speed according to your blending
requirements*:
• Use the speed 1 button for processing and mixing.
• Use the speed 2 button for blending and ice
crushing.
• Use the speed 3 button for pureeing and liquefying.
• Use the pulse button for controlled chopping and
processing.
* See Blending Chart.
NOTE: If you need to add additional ingredients while
the blender is processing, open the pouring spout cap
and pour the ingredients in through the opening.
12 Press power button ( ) or the same speed button a
second time to stop the Stacked Blade Assembly or
press a different button to change the speed.
Assembly and Use of the Pitcher - cont.
Fig. 5
Locking Handle
Fig. 7
USE REMOVAL
13 To remove the pitcher, press the power button ( ) to
turn the appliance 'Off'. Wait for the Stacked Blade
Assembly to stop moving before removing. (Fig. 6)
WARNING: Never insert your hands in the pitcher
as the Stacked Blade Assembly is sharp. Always
use a spatula to dislodge food that has stuck to
the sides of the pitcher.
14 Open the pour spout cap and use the spout to empty
liquid contents.
15 For thicker consistencies, first remove the lid by
pressing the release button and pulling the lid handle
up to a 90 degree angle to lift lid off the pitcher. Then,
carefully remove the Stacked Blade Assembly by the
top of the shaft. Place Stacked Blade Assembly away
from the work area to avoid accidental contact. Finally,
empty contents from the pitcher. (Fig. 7)
16 Make sure that the unit is unplugged when not in use.
To Next Page
Loading...
Need help?
General
