16a To pour out thinner mixtures,
ensure the lid is locked in
place, then open the pour
spout cap (Fig. 1).
15 To release the vacuum seal, gently
lift the FreshVac Tab. Air will enter
the pitcher, making it easy
to remove the lid.
16b For thicker mixtures that cannot
be emptied through the pour
spout, remove the lid and
stacked blade assembly before
pouring. To remove the lid, press
the LID RELEASE button and lift
the handle (Fig. 2). To remove
the blade assembly, carefully
grasp it by the top of the shaft
(Fig. 3). The pitcher can then be
emptied (Fig. 4).
17
Unplug the unit when finished.
To lift the motor base, place your
hands underneath both sides
of it and gently pull the unit up
and toward you. Refer to the
Care & Maintenance section for
storing instructions.
Fig. 1
Fig. 3
Fig. 2
Fig. 4
To Next Page
Loading...
Need help?
General