TIPS:
• If the stacked blade assembly is not
fully seated, you will not be able to
install and lock the lid.
• To learn more about the programs
that work with your FreshVac
Pitcher, refer to page 11.
5
Set the pitcher on a level surface
and place the FreshVac Pump on
top of the FreshVac Tab on the lid.
The pump DOES NOT lock into
place on the lid.
6
Press the power button on top of
the pump to begin vacuum sealing.
The pump will make a motorized
noise and the light on the pump will
illuminate in white while vacuum
sealing is in progress. You do not
need to hold the pump in place
while vacuum sealing.
7
When vacuum sealing is complete,
the pump will shut o automatically
and the green light on the pump
will illuminate.
8 To release the pump from the
pitcher, press the pump release
button on the bottom front of
the pump and lift.
9 To blend ingredients, follow
instructions on the next page.
To Next Page
Loading...
Need help?
General