Nintendo CONTROL DECK - NES System Care and Operation Precautions; General System Handling and Safety; Game Pak and Environmental Care; Controller Button and Pad Operations

e USING THE CONTROLLERS
Your NES includes two identical controllers. The controller you plug into controller
socket 1 becomes “Controller 1; the controller you plug into controller socket 2
becomes ‘Controller 2”. For one player, plug either controller into controller socket 1.
For two players, plug both controllers into the controller sockets.
@ SELECT BUTTON (Controller 1 only).
Each game pak contains several variations of the game. The SELECT button is used to
select the particular variation you want to play from the menu displayed at the begin-
ning of the game.
@ START BUTTON (Controller 1 only)
After selecting the game you want from the game menu, push the START button to
start the game. The START button can also be used to take a “time-out” in the middle
of a game. If you push the START button in the middle of a game, the game will freeze
(pause) where it is until the START button is pressed again.
Note: On some games there is no pause function.
@ CONTROL PAD
The 4-way Control Pad moves the main character of the game up, down, left, and right;
although its function may vary from game to game. Consult the instructions included
with your game pak for more details.
@ BUTTONS A ANDB
Buttons A and B perform different functions in different games. Consult the instruc-
tions included with your game pak for details.
NOTE: Do not insert or remove controllers from control deck during gameplay as this
may cause game malfunction.
10
5. RETURNING YOUR TV TO REGULAR
PROGRAM VIEWING
After you have finished playing, simply turn off the power switch on the Control Deck,
and turn your channel selector to the desired channel to view regular TV programs. (There
is no need to disconnect the RF switch, etc.)
6. CARE AND PRECAUTIONS
1, DO NOT USE ANY POWER PLUG OTHER THAN THE AC ADAPTER PROVIDED
WITH YOUR NES.
2. Do not use any RF switch other than the one included with your NES,
3. Do not disassemble or attempt to repair the NES
components. Doing so voids your warranties.
4. Always turn off the power switch on the Control
Deck before inserting or removing a game pak from
the chamber.
5. Before inserting a Game Pak, always check the Game Pak edge connector and remove
any foreign materials. In order to keep the contacts clean, avoid touching the
connector with your fingers.
6. After you have finished playing, be sure to remove the Game Pak from the Control
Deck and close the chamber cover.
7. Always keep Game Paks stored in their sleeves when not in use.
8. Do not pull or yank the NES wires.
9. Do not store the Control Deck on the floor for long periods where it may collect dirt,
dust, lint, etc.
10. Do not drop, bang, or abuse the NES components.
11. Do not leave the Controi Deck’s power on for extended periods when not in use.
12. When disconnecting the power plug, controller plugs, or the RF plug from the Control
Deck, pull from the plug itself - not from the wire.
13. Do not expose the Control Deck, game paks, the controllers, the RF switch, or the
AC adapter to extreme heat or cold.
14. Do not spill liquids on the Control Deck, game paks, controllers, RF switch, AC
adapter, etc. To clean, use a soft slightly damp cloth (use water only).
11