Nippon E - Page 4

OSEEX206-EN
4/10
VALVES SPECIFICATIONS
Water Oil Air, Gas Steam Chemicals Sea water Slurry Negative pressure
MH H type
Valve type MH H (Carbon steel) H (Stainless)
Design 2-way, Full port 2-way, Full port 2-way, Full port
Connection Threaded End Rc Threaded End Rc Threaded End Rc
Fluid
Max pressure 14 MPa 10 MPa 7 MPa 5 MPa 31.5 MPa 31.5 MPa 30 MPa
Size [mm] 010 to 020 025 010 to 020 025 008 to 020 008 to 015 020
Material Body SCS14A Carbon steel SUS316Ti
Ball SCS14A (HCr) SUS316Ti (HCr) SUS316Ti (HCr)
Seat POM R-F-PTFE POM POM
Stem seal Packing - - -
O-ring FKM FKM FKM
Note) It cannot be used POM seat for a water solution of more than 85 °C. (MH type)
PRESSURE & TEMPERATURE RATING
MH (POM) MH (R-F-PTFE)
H (Carbon steel) H (Stainless)