Nirvana INSTINCT NS230 HL - Bag for Assembled Paramotor

Last update 23.10.2012
25
67
Installation – open the flaps
with Velcro belts at the
bottom of the harness
68
insert and secure the inside
rescue container
69
Position of the rescue chute
handle secured on the right
side of the seat
70 71 72
Rescue chute handle
73 75 76
Bag for the assembled
paramotor
DO NOT EXPOSE CARBON
SKELETON TO THE BRIGHT SUN
LIGHT. UV RADIATION AND HIGH
TEMPERATURE CAN DAMAGE
THE DARK SURFACE OF THE
CARBON SKELETON. DURING
THE FLIGHT IN THE AIR THERE IS
THE SURFACE TEMPERATURE
ALL RIGHT, ANYWAY ON THE
GROUND USE ALWAYS THE BAG
FOR ASSEMBLED PARAMOTOR,
WHICH IS SUPPLIED IN THE
BASIC SET.
77
Repeated dismantling of
the paramotor into the
position for transport