41
just to make sure that you did everything correctly. Since that will require the time of a mechanic, there may be a modest charge for this service.
We also recommend that you ask your dealer for guidance on what spare parts, such as inner tubes, light bulbs, etc. it would be appropriate for
you to have once you have learned how to replace such parts when they require replacement.
A. Service Intervals
Some service and maintenance can and should be performed by the owner, and require no special tools or knowledge beyond what is
presented in this manual.
The following are examples of the type of service you should perform yourself. All other service, maintenance and repair should be performed in
a properly equipped facility by a qualified bicycle mechanic using the correct tools and procedures specified by the manufacturer.
1. Break-in Period: Your bike will last longer and work better if you break it in before riding it hard. Control cables and wheel spokes may
stretch or “seat” when a new bike is first used and may require readjustment by your dealer. Your Mechanical Safety Check (Section 1.C) will
help you identify some things that need readjustment. But even if everything seems fine to you, it’s best to take your bike back to the dealer for
a checkup. Dealers typically suggest you bring the bike in for a 30 day checkup. Another way to judge when it’s time for the first checkup is to
bring the bike in after three to five hours of hard off-road use, or about 10 to 15 hours of on-road or more casual off-road use. But if you think
something is wrong with the bike, take it to your dealer before riding it again.
2. Before every ride: Mechanical Safety Check (Section 1.C)
3. After every long or hard ride; if the bike has been exposed to water or grit; or at least every 100 miles: Clean the bike and lightly lubricate
the chain’s rollers with a good quality bicycle chain lubricant. Wipe off excess lubricant with a lint-free cloth. Lubrication is a function of climate.
Talk to your dealer about the best lubricants and the recommended lubrication frequency for your area.
To Next Page
Loading...