Need help?Do you have a question about the Nissin MG80 Pro and is the answer not in the manual?
Explanation of the Nissin Air System (NAS) and its components.
Important warnings regarding potential damage or defects to the unit.
Identification and overview of the flash unit's external controls and parts.
Steps for correctly inserting batteries into the flash unit.
Explanation of the flash unit's energy saving modes and functions.
Meaning of blinking signals on the Pilot Button indicating battery status.
Procedure to reset the Nissin MG80 Pro to its factory default settings.
Instructions for attaching the MG80 Pro to a camera hotshoe.
Instructions for detaching the MG80 Pro from a camera hotshoe.
Overview of the flash unit's on-camera operational mode.
Overview of the flash unit's commander operational mode.
Overview of the flash unit's slave operational mode.
Using the MG80 Pro as a slave unit in wireless flash systems.
Steps to pair the MG80 Pro with other Nissin NAS units.
How to set up and use the "Open Mode" for flexible strobe control.
Explanation of basic and advance groups for controlling slave units.
How to assign slave units to different groups (A, B, C, D, etc.).
How to turn individual groups of slave units on or off.
Switching between TTL and Manual (M) exposure modes for flash power.
Adjusting TTL flash exposure compensation from -2EV to +2EV.
Saving last flash power settings between TTL and M modes.
Controlling flash power in Manual (M) mode from 1/256 to 1/1.
Setting the zoom head for auto, auto limited, and manual focal lengths.
Table showing guide numbers for different zoom positions and power levels.
Using bounce lighting to soften shadows and control light direction.
How the AF assist light illuminates subjects in low light for focusing.
Using the modeling light to preview flash output before shooting.
How to enable or disable the High Speed Synchronize function.
How exposure compensation and manual power work in HSS mode.
How to switch the audible buzzer on or off for the strobes.
Steps to check the current firmware version of the MG80 Pro.
Technical details and features of the Nissin MG80 Pro flash.
Conditions that may void the product warranty.
Explanation of the Nissin Air System (NAS) and its components.
Important warnings regarding potential damage or defects to the unit.
Identification and overview of the flash unit's external controls and parts.
Steps for correctly inserting batteries into the flash unit.
Explanation of the flash unit's energy saving modes and functions.
Meaning of blinking signals on the Pilot Button indicating battery status.
Procedure to reset the Nissin MG80 Pro to its factory default settings.
Instructions for attaching the MG80 Pro to a camera hotshoe.
Instructions for detaching the MG80 Pro from a camera hotshoe.
Overview of the flash unit's on-camera operational mode.
Overview of the flash unit's commander operational mode.
Overview of the flash unit's slave operational mode.
Using the MG80 Pro as a slave unit in wireless flash systems.
Steps to pair the MG80 Pro with other Nissin NAS units.
How to set up and use the "Open Mode" for flexible strobe control.
Explanation of basic and advance groups for controlling slave units.
How to assign slave units to different groups (A, B, C, D, etc.).
How to turn individual groups of slave units on or off.
Switching between TTL and Manual (M) exposure modes for flash power.
Adjusting TTL flash exposure compensation from -2EV to +2EV.
Saving last flash power settings between TTL and M modes.
Controlling flash power in Manual (M) mode from 1/256 to 1/1.
Setting the zoom head for auto, auto limited, and manual focal lengths.
Table showing guide numbers for different zoom positions and power levels.
Using bounce lighting to soften shadows and control light direction.
How the AF assist light illuminates subjects in low light for focusing.
Using the modeling light to preview flash output before shooting.
How to enable or disable the High Speed Synchronize function.
How exposure compensation and manual power work in HSS mode.
How to switch the audible buzzer on or off for the strobes.
Steps to check the current firmware version of the MG80 Pro.
Technical details and features of the Nissin MG80 Pro flash.
Conditions that may void the product warranty.
General| Flash Type | Speedlight |
|---|---|
| Flash Modes | TTL, Manual, Multi |
| High-Speed Sync | Yes |
| AF Assist Beam | Yes |
| Zoom Range | 24-200mm |
| Recycle Time | 0.1 - 2.5 seconds |
| Firmware Upgradeable | Yes |
| Swivel Angle | 180° |
| Guide Number | 80 |
| Wireless Communication | Optical Wireless (Master/Slave) |
To Next Page
